Khaju Bridge
The Khaju Bridge (Pol-e-Khajoo) in Isfahan, Iran, was built in the 17th century by Shah Abbas II. The bridge also serves as a dam, with sluice gates under the archways. When the gates are closed, the water level behind the bridge is raised to irrigate gardens alongside the Zayandeh River.
The Khoju Bridge has two stories of arcades, marked by the distinctive intersecting arches decorated with richly colored tiles. At the center of the bridge, there are two large pavilions, called the Prince Parlors, that were originally reserved for the Shah.
9. Pont du Gard
Pont du Gard.
The Pont du Gard was built by Marcus Vipsanius Agrippa (63 - 12 BC), the son-in-law of Caesar Augustus. The bridge's stones, some of which weigh up to 6 tons, were cut perfectly to fit together without any mortar.
The wedge-shaped stones, known as voussoirs, were arranged in three levels, the top-most being the water conduit. So precise was the engineering that the entire system descends only 56 ft. (17 m) vertically - over 30 miles! - to deliver 5 million gallons (20,00 m3) of water to the city.
8. Bridge of Sighs
The Bridge of Sighs.
In reality, Doge's prison held mostly small-time criminals. Also, the bridge was built in 1600 by Antonio Contino, after the days of the inquisitions and summary executions. Legend has it that if lovers kissed on a gondola underneath the Bridge of Sighs at sunset, their love would last for eternity.
7. Iron Bridge
Iron Bridge.
Iron bridge at night. Notice how the bridge and its reflection make a perfect circle.
In the 18th century, Shropshire was rich in iron and coal - indeed, there were more iron factories within two-mile radius of the town than any other city in the world. It was also there that iron was first smelt with coke. So it was only natural that the bridge would be made out of iron, a stronger alternative to wood. (Photo of the railing:
Architect Thomas Farnolls Pritchard proposed a single arch bridge that would let boats pass underneath, but he died before the bridge was built. The construction of the Iron Bridge was carried out by a local master ironworker named Abraham Darby III. About 400 tons (363 tonnes) of cast iron was used, with about 800 separate castings. The Iron Bridge has 5 arch ribs, each cast in two halves. It only took three months to put the parts together (which they did using screws instead of bolts!).
The ease and speed of the Iron Bridge's construction helped convince engineers of the versatility and strength of iron, and helped usher in the Industrial Revolution era. Darby, however, didn't fare so well: he severely underestimated the cost to build the bridge, and remained in debt for the rest of his life.
6. Covered Bridges
The West Montrose Covered Bridge on the Grand River, Ontario, Canada. It's known locally as the Kissing
Pisgah Covered Bridge in southern Randolph County, North Carolina. It was washed away by a flood in 2003, but rebuilt with 90% of the original wood. It's now one of two historic covered bridges left in the state.
Thomas Malone Covered Bridge in Beaver Creek State Park, Ohio.
Before they are made famous by the 1995 Clint Eastwood film The Bridges of Madison County, "kissing bridges" or "tunnels of love" have been the pride and joy of many small towns across Europe and especially Northern America where more than ten thousands of such bridges were built.
In the 19th century, timber was plentiful and cheap (or, in many cases, free). So it's natural that these bridges were made of wood. But why were they covered? Well, lovers aside, the real reason was much more practical: the wooden beams of the bridge lasted longer when protected from the elements.
Unfortunately, due to neglect, theft of lumber, vandalism, and fire, most covered bridges in the United States and Canada have disappeared.
5. Ponte Vecchio
Ponte Vecchio at night.
The Ponte Vecchio that we know today was built in 1345 by Taddeo Gaddi after an older span was destroyed in a flood. To finance the bridge, lots along the roadway were rented out to merchants, especially butchers and tanners, to hawk their wares.
In 1565, Duke Cosimo I de Medici ordered an architect named Giorgio Vasari to construct a roofed passageway. Soon after, jewelers, goldsmiths, and merchants of luxury goods pushed out the butchers out of Ponte Vecchio. Centuries of haphazard additions gave the bridge's distinctive, irregular appearance today.
During World War II, after having survived many floods, the bridge faced its gravest threat: German bombers were blowing up bridges in Florence. It was a direct order from Hitler that spared Ponte Vecchio from certain destruction.
It is said that the word "bankruptcy" came from Ponte Vecchio. When a merchant failed to pay his debt, the table ("banco") he used to sell his wares was broken ("rotto") by soldiers. Not having a table anymore ("bancorotto"), meant the seller was bankrupt.
4. The Wind and Rain Bridge
Chengyang Bridge.
The Dong people don't use nails or rivets to build these bridges - instead, they dovetail all of the wood. The largest and most magnificent is the Chenyang Bridge, spanning the Linxi River near the Dong village of Maan. The bridge is about 100 years old, and like all wind and rain bridges, it was built without a single nail.
3. Brooklyn Bridge
Brooklyn Bridge. Photo:
Brooklyn Bridge at sunrise.
Today, the Brooklyn Bridge is one of the main crossings of the East River and one of the most heavily trafficked bridges in the world. But in the late 19th century, it took Roebling more than 14 years to convince the city to build the bridge.
After he got approval, Roebling was surveying a site when his foot was crushed by a ferry. Three weeks before the scheduled groundbreaking, he died of tetanus. His son, an engineer named Washington Roebling took over the project.
When the Brooklyn Bridge was opened, Emily was honored with the first ride over the bridge. She held a rooster, a symbol of victory, in her lap. Washington himself rarely visited the bridge till his death in 1926.
One interesting note about the Brooklyn Bridge: it stood fast while other bridges built around the same time had crumbled. Engineers credit Roebling for designing a bridge and truss system six times as strong as he thought it needed to be!
2. Tower Bridge
Tower Bridge at twilight.
Tower Bridge at night.
Construction of the Tower Bridge started in 1886, led by architect Sir Horace Jones and engineer Sir John Wolfe Barry. The design was a bascule (draw) bridge with two towers built on piers, so the bridge wouldn't interefere with the port facilities nearby.
A year after construction was started, Jones died and his replacement, George D. Stevenson along with Barry decided to modify the design a little bit. Instead of the original brick facade design, the Tower Bridge had a more ornate Victorian Gothic style meant to harmonize it with the nearby Tower of London.
When the bridge opened in 1894, the public was aghast. H. Heathcote Statham, Fellow of the Royal Insitute of British Architect, wrote the familiar sentiment as thus: "The Tower Bridge ... represents the vice of tawdriness and pretentiousness, and of falsification of the actual facts of the structure."
But over time, people warmed up to the bridge. Indeed, the Tower Bridge grew to be one of London's most recognizable landmarks. Even one of its loudest critics, architectural critic Eric de Maré conceded: the British people "have grown fond of the old fraud ... and we must admit that it has carried on its task with admirable regularity and efficiency." (Source: Dupré, J., Bridges; 1997 Black Dog & Leventhal Publishers)
1. Golden Gate Bridge
Golden Gate Bridge in HDR as the first big storm of the season hits San Francisco.
In 1916, the idea of a bridge to cross the Golden Gate, a narrow strait that separated San Francisco Peninsula and the Marin Headlands, was conceived. Though it was almost immediately dismissed as the cost was estimated to be $100 million (astronomical for the time), a veteran bridge builder named Joseph Strauss lobbied for more than two decades to have it built.
The Golden Gate Bridge faced tough opposition: the Department of War thought it would interfere with ship traffic and the Southern Pacific Railroad opposed it as competition to its ferry service. At first, even the public didn't like the bridge ... because Strauss' original design was deemed too ugly! But Strauss finally won, and after 22-years of drumming up support, the bridge was built.
Strauss insisted that the project take worker's safety seriously. It was the first major bridge project that used hard hats and a safety net. During the course of construction, 19 people were saved by the net to become members of the Halfway to Hell Club.
The color of the Golden Gate Bridge is actually not red - it's an orange vermillion called International Orange. The color was chosen specifically because it complements the bridge's natural surrounding yet enhances its visibility in the fog.
Construction took more than four years, at a cost of $27 million. The Golden Gate Bridge actually came in $1.3 million under budget (though 5 months late). For his work, Strauss got $1 million ... and a lifetime bridge pass!
We'll be the first to acknowledge that this list is far from complete. Modern beauties like the Millau Viaduct, the Erasmusbrug, or the Tsing Ma Bridge aren't on it. (Well, we did say "classic" bridges ...)
Nor is this the only "top 10 bridges" list on the Web. Though many of our picks are the same, there are enough differences between this list and others that you should also check them out.
Finally, there are thousands of bridges in the world and hundreds of major bridges that are sources for local prides. If your town's favorite span isn't included here, please don't get mad. Instead, let us know in the comment so interested readers can find them.
No comments:
Post a Comment